IO-Link
Configuration of IO-Link master systems integrated in the IEC 61131-3 development system
Integrated IO-Link master support in CODESYS
The single master system IO-Link allows for the access and operation of intelligent sensors and actors in automation systems. CODESYS supports IO-Link with an integrated IO-Link master configurator. Both controllers with an IO-Link interface (e.g. Festo® Mechatronik Controller CECC) or field bus gateways to the IO-Link (e.g. Beckhoff® EtherCAT® / IO-Link clamp EL6224) can be configured with CODESYS IO-Link.
Available products and related datasheets:
CODESYS IO-Link Master (for EL6224) SL »
Howtoget
- You are a system integrator or a user in the plant construction sector or the like:
CODESYS IO-Link SL can be licensed and used as an additional component on some CODESYS-compatible devices as well as on the CODESYS Control SoftPLC systems available in the CODESYS Store. - You are a manufacturer of programmable devices:
If an IO-Link protocol stack is implemented in your device, you can have the IO-Link support implemented as a service.
Alternatively, you can enable the option of single licensing (SL) on your devices. This allows the users of your devices to license CODESYS IO-Link SL on their part if required. - For more information please contact our sales department under info@emea.com.tr
Products
Integrated Fieldbus Support in the IEC 61131-3 Tool: Industrial protocols, protocol stacks and diagnostics for real-time Ethernet, classic fieldbuses and industry protocols
Industrial Ethernet
CODESYS with Industrial Ethernet: Integrated configurators or protocol stacks for EtherCAT®, PROFINET, EtherNet/IP™ in the IEC 61131-3 development system
PROFIBUS
Configuration, usage and diagnostics of PROFIBUS master and slave in the IEC 61131-3 development environment CODESYS Development System.
CAN
CANopen® Master / CANopen Slave / J1939 / Raw CAN supported directly in the IEC 61131-3 Development System
Modbus TCP/RTU
The serial Protocol with Stack and Configurator, fully integrated in the IEC 61131-3 Development System
KNX
I/O channel configuration, protocol stack and workflow for data exchange with ETS5®, fully integrated in the IEC 61131-3 development system
BACnet
Configurator and protocol stack fully integrated in the IEC 61131-3 Development System